SEARCH BY PARTCATEGORIES
|
![]() ![]() Due to the power of the 55W ballast, the output is slightly washed out as seen above. We sell bulbs with kelvin ratings that range from 3000K to 12000K. 3k being yellow and 12k being the bluish in color. The most popular color we sell is 6000k. That would be described as white with a hint of blue. For maximum visibility, we would recommend staying within 4500K-6000K. The closer the color is to natural sunlight, the more you will see on the road. ![]() You will lose visibility when going towards 12000k. Most people who do 10000-12000k are going for a specific look. The Ballast are what controls the brightness of the output while the bulb will reflect the color of the light. Note: All projectors can vary in color. Our colors are true to our description. Bulb colors can appear to be different based on outside factors, such as the type of headlight you are putting them in and they way the light is being reflected or projected out of them. Read more about kelvin rating and bulb color Our kits are sold for every make and model, only dependent on your bulb type. We do not know the bulb type for ever car, but we highly recommend looking in your owners manual, or popping out a bulb and referencing it to our visual HID bulb guide to find out what bulb type you have. Hi/Low kit? Certain vehicles have a single bulb that has a low and high beam function inside of it. Most vehicles have a separate bulb for low and high, but for vehicles with a low and high beam in the same assembly, we sell those as well. The Sylvania bulb guide is to be used as a resource, it is the best on the internet, but it is not always 100% accurate. We can not guarantee it is accurate, nor will re send you 'correct' bulbs if the ones sylvania told you are incorrect.
HID Kits for any car, truck, or SUV. Finally, a great priced, slim ballast, fully digital, HID kit available in 55w and 35w.
Fully digital, draws less than 6 amps at start up and 3.4 amps at normal operating temperature. This system provides 3200-3400 Lumens at 35 watts and an amazing 5000 Lumens at 55 watts per bulb. In comparison, a typical halogen bulb produces 900-1200 lumens. All kits use AC bulbs and ballasts for increased reliability and lifespan.
What is the difference between 55w and 35w kits? *High / Low kits come with a fused relay harness and controller that regulates the high / low operation* High / Low bulbs use an electromagnet in the base to move the bulb from the low to high beam position so it's HID Low and HID High beams.
Will this HID kit work on my vehicle? Simply put, yes; we have our own bulbs, not sold anywhere else, in every bulb type. Be sure that the kit itself will work with your cars electrical systems, some modern cars requires BOWs and harnesses in order to run at 100%! Use the relay harness to connect HIDs to cars with very small gauge wiring that cannot supply the initial surge current required to light the bulbs reliably. May be needed for vehicles where the daytime running light is being converted to HID. Relay harness is not needed for High / Low kits as they come with a relay harness.
Recommended for all 55W HID installations but most American and European cars work at 35W/55W without the harness. The harness is definitely recommended for Quad's and other ATVs or when running multiple HID installations. This harness is a fused relay isolation harness capable of supplying 40A at 12vdc. **Some D2R/D2S applications and retrofits will require the H1 to 9006 adaptors and may require you to cut and splice these to the factory wiring if the original application does not use a 9006 connector.
|
SHOPPING CARTSHIPTICKR™ |
LED Lighting |
HID Kits and More |
Site Map |
|
![]() Copyright © 2013 DDM Tuning. All rights reserved
|
|||